The pictures show the product for sale. Pictures are better than words. My pictures show exactly the offered item.
If there should be more, it will be mentioned in the description. I've written everything about the product.I accept no liability for damage resulting from transport. I do not accept complaints.
If you have any questions, please ask. Because this item is used / it will show minimum to moderate cosmetic wear and may have some noticeable, scratches, scuffs, dust, and other wear.We would also advise viewing each of the pictures to get a better idea of condition specifics. The main features of the Kenwood KX-1100HX are: 3 heads and no off-tape monitoring to save production cost. Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the KX-1100HX are generic digital peak reading meters. Full-logic transport controls used on the KX-1100HX. Let it respond to the slightest finger contact for fast and effortless transport function selection. Dolby C-type used in the KX-1100HX provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range. The result is recorded sound that is highly faithful to the original.
To make live recordings this deck has 2 microphone inputs to connect microphones with a jack connector. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. A 3-head cassette deck with an amorphous combination head.It is equipped with Super TLLE which has excellent recording head drive capability. By best matching with 3 heads with low back EMF voltage, it is possible to record with low distortion rate. And sound quality with excellent phase characteristics.
A unique high-rigidity mechanism is adopted for the mechanism part. In this mechanism, decorative plates such as cassette half guides and reference guides are integrally molded. With zinc die-cast and mounted firmly. In addition, by attaching this zinc die-cast decorative plate directly. To the main body chassis, the fixing strength of the mechanism is improved.
It uses a magnetic thrust absorber to pull the capstan in a certain direction with a magnet to achieve a stable. Head touch between the tape and the recording / reproducing head. This reduces jitter and realizes clear sound. Uses a double-gap ferrite with sendust guard erasing head.In the conventional ferrite head, holes on the surface of the ferrite form innumerable minute heads to generate. A new magnetic field and demagnetize the residual magnetic flux on the tape. In the double-gap ferrite with Sendust guard head. Sendust is stuck on the surface of the ferrite core to reduce the contact demagnetization effect and prevent the degradation of high-frequency characteristics. Equipped with left and right independent Rec calibration and bias calibration.
It uses a full-scale calibration system that records 400 Hz and 10 kHz signals and adjusts the sensitivity and. Bias independently on the left and right sides. To the start position to prepare for recording. A new amorphous combination head with oxygen-free copper windings is used for the recording and reproducing heads.
Equipped with Dolby HX Pro System. This circuit improves the recording capability of the tape by automatically adjusting the bias amount of the high frequency band. Equipped with New Double Dolby system with unique circuit. A closed-loop dual capstan system is adopted, and good head touch is realized by keeping the tape tension constant.
Uses zinc die-cast and mechanical mount. High-precision parts are used for the power supply part. Recycled : Amorphous Alloy Head (Combination) Recording : Amorphous Alloy Head (Combination) Erasing : double-gap ferrite with dust guard head. Capstan Drive : FG Servo DD Motor Reel drive : DC motor Mechanical Drive : DC Motor.
± 0.04% (EIAJ) 0.025% (WRMS). Approximately 80 Seconds (C-60 Tape). Normal tape : 20 Hz 18 kHz ± 3 dB Chrome Tape : 20 Hz 19 kHz ± 3 dB Metal Tape : 20 Hz 22 kHz ± 3 dB. Metal Tape : 0.6% (1 kHz, Third Harmonic Distortion Factor).
EIAJ Metal Tape : 57 dB Dolby C on:75dB Dolby B on:68dB Dolby NR off:60dB. Line : 77.5mV/50k O Microphone : 0.3mV/600 O. Line : 490mV/2k O Headphone : 0.85mW/8 O. 35W (Electrical Appliance and Material Control Law). Width 440x Height 111x Depth 322 mm.This item is in the category "Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Cassette Decks". The seller is "vetroistvan" and is located in this country: HU. This item can be shipped worldwide.